![]() ![]() Maple Chase (an Invensys unit based in Downers Grove, IL) recently introduced the Insight™ thermostat, which the company called “an easily programmed device that will finally fulfillĪccording to Timothy Butler, senior product manager of Maple Chase, “The programming is completely intuitive, unlike any other thermostat on the market. However, the “Call for Check Up” will then be displayed for 1 minute every 15 minutes, then automatically returns to normal temperature display this function will continue until the contractor resets the run time.Īprilaire's Communicating thermostat boasts increased flexibility and easier installation. The homeowner presses up or down buttons, and the “Check Up” display disappears, returning to the normal temperature display. The display reads “Call for Check Up,” with system needing service (filter/ heater/air conditioning) and the contractor’s phone number. ![]() The telephone number of the service contractor also is displayed (10 digits). The hvac systems’ run-time hours are also set by the contractor when those hours are up, the thermostat displays a message to call the contractor for a system check-up. ![]() The contractor sets the hours of fan run time when that time has elapsed, a message on the thermostat tells the homeowner when filters need to be changed. The Medallion also features “Service Watch,” which helps contractors remind customers that their equipment needs service and maintenance performed either by the homeowner (filter changes) or the contractor (system checkup). Three buttons along the bottom indicate fan, up, and down arrows (for controlling temperature). The face plate is simple: high, low, auto, and stop. It also features soft stop and comfort limits. ![]() Features include auto changeover from heat to cool, a two-speed fan, continuous fan speed, and user-selected fan configuration (depending on the model selected). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |